SITRANS F M MAG 5100 W

Description

The SITRANS F M MAG 5100 W with its patented liners of hard rubber NBR or ebonite and EPDM is a sensor for all water applications such as ground water, drinking water, cooling water, waste water, sewage or sludge applications.

In order to have a complete flowmeter, please combine it with one of the following MAG transmitters:
SITRANS F M MAG 5000: Cost efficient transmitter, accuracy of + 0.4 % of flow rate
SITRANS F M MAG 6000: Bus communication, batch function and accuracy of + 0.2 % of flow rate
SITRANS F M MAG 6000 I: Alu enclosure, Ex approvals, bus communication, batch function and accuracy of + 0.2 % of flow rate
The sensor can be combined with the energy calculator SITRANS FUE950

Application examples: Water abstraction, Water distribution network, Waste water and as custody transfer water meter or cooling meter.

Detail

Meassuring range	0 to 10 m/s
Nominal Sizes	From DN 15 to DN 2000 (1" to 78")
Accuracy	0.2 % ±2.5 mm/s
Operating Pressure	Max. 16 bar (Max. 150 psi)
Ambient temperature	From -40 to 70 °C (-40 to 158 °F)
Medium Tempreature	From -10 to 70 °C (14 to 158 °F)
Liners	EPDM NBR hard rubber Ebonite hard rubber
Electrodes	Hastelloy C-276 Built-in grounding electrodes
Material	Carbon steel, with corrosion resistant two-component epoxy coating
Drinking Water Approvals	EPDM: WRAS, NSF/ANSI Standard 61, DVGW 270, ACS and BelgAqua NBR: NSF/ANSI Standard 61, WRAS Ebonite: WRAS
Custody Transfer Approvals	OILM R 49 MI-001 PTB K7.2 (Germany) BEV OE12/C040 (Austria)
General approval	MCERTS Sira Certificate No. MC080136/00

Benefits

Short lead time
Rugged NBR hard rubber liner for all water and wastewater applications
EPDM liner specifically for drinking water applications requiring special approvals
Ebonite liner for drinking water, water and wastewater applications
Increased low flow accuracy for water leakage detection (NBR or EPDM liner)
Suitable for direct burial and constant flooding (IP68)
Designed to allow patented MAG in-situ verification using the SENSORPROM fingerprint

Main Menu

SITRANS F M MAG 3100 P

Description

The SITRANS F M MAG 3100 P sensor is designed to meet the most common specifications within the chemical and process industries. It has PTFE or PFA liners and Hastelloy electrodes being the ideal combination. The fully welded construction provides a ruggedness that fits almost every flow application.

In order to have a complete flowmeter, please combine it with one of the following MAG transmitters:
SITRANS F M MAG 5000: Cost efficient transmitter, accuracy of + 0.4 % of flow rate
SITRANS F M MAG 6000: Bus communication, batch function and accuracy of + 0.2 % of flow rate
SITRANS F M MAG 6000 I: Alu enclosure, Ex approvals, bus communication, batch function and accuracy of + 0.2 % of flow rate

Application Examples: Process industry, Chemical industry, Pulp & paper industry

Detail

Meassuring range	0 to 10 m/s
Nominal Sizes	From DN 15 to DN 300 (½" to 12")
Accuracy	0.2 % ±1 mm/s
Operating Pressure	Max. 40 bar (Max. 580 psi)
Ambient temperature	From -40 to 100 °C (-40 to 212 °F)
Medium temperature	From -20 to 130/150 °C (-4 to 266/302 °F)
Liners	PFA PTFE (Teflon)
Electrodes	Hastelloy C22 Hastelloy C276
Material	Carbon steel with corrosion resistant two component epoxy coating
General approval	ATEX - 2 GD Zone 1, FM / CSA Class 1 div 2

Benefits

Short lead time 5 days + transportation
Excellent chemical resistance also during high process temperature
Designed to allow patented MAG in-situ verification using the SENSORPROM fingerprints
Approved for hazardous areas

Main Menu

SITRANS F M MAG 3100

Description

SITRANS F M MAG 3100 is an electromagnetic flow sensor with a large variety of liners, electrode material and with grounding electrodes as standard, all this ensures a perfect fit for almost every flow application.
Also, measuring electrodes which are capable of withstanding the most extreme processes and various liners are available.
The fully welded construction provides a ruggedness that fits almost every flow application.

In order to have a complete flowmeter, please combine it with one of the following MAG transmitters:
SITRANS F M MAG 5000: Cost efficient transmitter, accuracy of + 0.4 % of flow rate
SITRANS F M MAG 6000: Bus communication, batch function and accuracy of + 0.2 % of flow rate
SITRANS F M MAG 6000 I: Alu enclosure, Ex approvals, bus communication, batch function and accuracy of + 0.2 % of flow rate

Application Examples: Process industry, Chemical industry, Steel industry

Detail

Meassuring range	0 to 10 m/s
Nominal Sizes	From DN 15 to DN 2000 (½" to 78")
Accuracy	0.2 % ±1 mm/s
Operating Pressure	Max. 100 bar (Max. 1450 psi)
Ambient temperature	From -40 to 100 °C (-40 to +212 °F)
Medium temperature	From -40 to 180 °C (-40 to 356 °F)
Liners	Neoprene EPDM PTFE PFA Ebonite Linatex
Electrodes	AISI 316 Ti (1.4571) Hastelloy C Platinum/iridium Titanium Tantalum
Material	Carbon steel (or AISI 304) with corrosion resistant two component epoxy coating or AISI 316 L polished flanges and housing
General approvals	E.g.: ATEX, FM, CSA, CT and Drinking Water approvals

Benefits

Flexible sensor program with several pipe dimensions available and additionally liner and electrode options
Approvals for PTB, OIML R 75, OIML R 117, ATEX, NSF/ANSI Standard 61, WRAS
Designed to allow patented MAG in-situ verification using the SENSORPROM fingerprints
Approved for hazardous areas

Main Menu

SITRANS F M MAG 1100 F

Description

The SITRANS F M MAG 1100 F sensor is especially designed for the food & beverage and pharmaceutical industries and is available with hygienic and flexible process connections. It meets all sanitary requirements and is 3A certified and EHEDG approved.
In order to have a complete flowmeter, please combine it with one of the following MAG transmitters:
SITRANS F M MAG 5000: Cost efficient transmitter, accuracy of + 0.4 % of flow rate
SITRANS F M MAG 6000: Bus communication, batch function and accuracy of + 0.2 % of flow rate
SITRANS F M MAG 6000 I: Alu enclosure, Ex approvals, bus communication, batch function and accuracy of + 0.2 % of flow rate
Application Examples: Food industry, Beverage industry, Pharmaceutical industry

Detail

Meassuring range	0 to 10 m/s
Nominal size	From DN 10 to DN 100 (3/8" to 4")
Accuracy	0.2 % ± 1 mm/s 0.4 % ± 1 mm/s (PFA)
Operating Pressure	Max. 40 bar (Max. 580 psi)
Ambient temperature	From -40 to 100°C (-40 to 212°F)
Medium temperature	From -30 to 150 °C (-20 to 300 °F)
Liners	Ceramics PFA
Electrodes	Platinum Hastelloy
Material	Stainless steel AISI 316L (1.4404)
Approvals	ATEX - 2 GD Zone 1, FM Class 1 div 2 EHEDG 3A

Benefits

Flexible and unique process connections
Standard liner options that fully cover the food and beverage applications
Short delivery time on standard process connections
IP67/NEMA 4x rating that is upgradable to IP68/NEMA 6P
Sanitary design for CIP/SIP cleaning

Main Menu

SITRANS F M MAG 1100

Description

SITRANS F M MAG 1100 is a wafer design sensor in stainless steel with highly resistant liners and electrodes and is designed for the general industry environment. The flangeless wafer design meets all flange standards.
The SITRANS F M MAG 1100 is used in all industries where the corrosion-resistant stainless steel housing and the highly resistant liner and electrodes fit even the most extreme process media.

In order to have a complete flowmeter please combine it with one of the following MAG transmitters:
SITRANS F M MAG 5000: Cost efficient transmitter, accuracy of + 0.4 % of flow rate
SITRANS F M MAG 6000: Bus communication, batch function and accuracy of + 0.2 % of flow rate
SITRANS F M MAG 6000 I: Alu enclosure, Ex approvals, bus communication, batch function and accuracy of + 0.2 % of flow rate

Application examples: Process industry, Chemical industry, Water treatment

Detail

Meassuring range	0 to 10 m/s
Nominal Sizes	From DN 2 to DN 100 (1/12" to 4")
Accuracy	0.2 % ±1 mm/s 0.4 % ±1 mm/s (PFA)
Operating Pressure	Max. 40 bar (Max. 580 psi)
Ambient temperature	From -40 to 100 °C (-40 to 212 °F)
Medium temperature	From -30 to 200 °C (-22 to 390 °F)
Liners	Ceramics PFA
Electrodes	Platinum Hastelloy
Material	Stainless steel AISI 316L (1.4404)
Approvals	ATEX - 2 GD Zone 1, FM Class 1 div 2

Benefits

Compact wafer design meets EN 1092, DIN and ANSI flange standards
Easy Plug & Play field changeability of transmitter
Compact or remote mounting possible
Highly resistant liner and electrodes that are suitable for most extreme process media
Designed to allow patented MAG in-situ verification using the SENSORPROM fingerprint