SITRANS F C MC2 DN 50-150 / DN 20-80 (Hygenic)

Description

The SITRANS F C MC2 DN 50 to 150 is suitable for accurate mass flow measurement for all kind of liquids due to the high accuracy, which is better than 0.15% of the mass flow rate. Due to the versatility the meter is easy to install and is recognized for its high accuracy in a wide turndown range which is a paramount in many applications.
The sensor is designed with a parallel S-tube and optimal oriented inductive pick-ups enhancing the accuracy and turn-down range as well as a space saving compact split-flow sensor design facilitating low pressure drop. The SITRANS F C MC2 is self-draining in both horizontal and vertical position.
The SITRANS F C MC2 also includes a EHEDG approved hygenic version based on the SITRANS F C MC2 standard design. The hygenic version comes in the sizes DN 20 to DN 80 covering the required sizes within food & beverage applications.
In order to make a complete flowmeter, the SITRANS F C MC2 flow sensor must be combined with one of the following MASS transmitters:
SITRANS F C MASS 6000 (only remote installation): For general industry applications
SIFLOW FC070: For direct integration into SIMATIC based systems
Typical applications: Dosing within chemical and pharma (dosing of chemicals), Food & beverage (milk, cream, pastes) and Oil.

Detail

Measuring range	From 2130 to 510000 kg/h (standard version) From 230 to 113400 kg/h (hygenic version)
Nominal size	From DN 50 to DN 150 (2" to 6") (standard version) From DN 20 to DN 80 (3/4" to 3") (hygenic version)
Accuracy	≤ 0.15% of rate
Nominal pressure	Max 100 bar (Max 1450 psi)
Medium temperature	From -50 to 180 °C (-58 to 356 °F)
Sensor design	Two tube bended
Enclosure	IP67
Approvals	≤ DN 40: II 1/2 EEx em [ib] IIC T2-T6 ≥ DN 50: II 2G EEx em [ib] IIC T2-T6

Benefits

Space saving dual sensor design facilitating low pressure loss
Parallel S-tube design and optimal oriented inductive sensors enhances accuracy and turn-down range
Rigid enclosure design reduces the influence from pipeline vibration and thermal stress
EHEDG approved sensor design including a high variety of hygienic connectors
SENSORPROM enabling true Plug & Play facilitating cost efficient installation and commissioning
Enhanced safety with superior safe Ex-design EEx em [ib] IIC; ≤ DN 40: II 1/2 EEx em [ib] IIC T2-T6, ≥ DN 50: II 2G EEx em [ib] IIC T2-T6)

SITRANS F C MASS 2100 DI 3-40

Description

The SITRANS F C MASS 2100 DI 3-40 is suitable for accurate mass flow measurement for all kind of liquids and gases. The full bore design provides lower pressure loss due to same internal diameter throughout the entire sensor and the single tube construction without internal welds, reductions or flow splitters offers optimal hygiene, safety and CIP cleanability. The sensor is also characterized by having a large dynamic turn down range better than 500:1 and the market's thickest tube wall to ensure highest integrity.

Integral heating is optionally available to avoid solidification of sensitive fluids during down time or period between discontinuing processes.

In order to make a complete flowmeter, the SITRANS F C MASS 2100 flow sensor must be combined with one of the following MASS transmitters:
SITRANS F C MASS 6000 (only remote installation): For general industry applications
SIFLOW FC070: For direct integration into SIMATIC based systems

Typical applications: Dosing within chemical industry (dosing of chemicals), Food & beverage industry (beer, juices, liquid such as chocolate, dressings) and Automotive industry (Engine test rigs)

Detail

Measuring range	From 0 to 52000 kg/h (0 to 114,600 lb/h)
Nominal size	From DI 3 to DI 40 (1/8" to 1½")
Accuracy	≤ 0.1 % of rate
Nominal pressure	Max 410 bar (Max 5946 psi)
Medium temperature	From -50 to 180 °C (-58 to 356 °F )
Sensor design	One tube bended
Enclosure	IP65 (NEMA 4)
Approvals	ATEX EEx (ia) IIC T3-T6

Benefits

Centre-block design decouples process noise from the environment such as vibrations, pulsations, pressure shocks etc. making installation flexible and versatile
Rugged and space saving sensor design in stainless steel matching all environments
Multiplug electrical connector and SENSORPROM enables true Plug & Play facilitating cost efficient installation and commissioning
4-wire Pt1000 temperature measurement ensures optimum accuracy on mass flow, density and % fraction
Intrinsically safe Ia II C as standard, making service in harzadous area possible with out having to demount the sensor if the compact Ex d transmitter needs service

SITRANS FC300 DN 4

Description

SITRANS FC300 is a compact coriolis mass flowmeter sensor suitable for flow measurement of all kind of liquids and gases. The sensor offers superior performance in terms of flow accuracy, turn-down range and density accuracy.
The single tube construction without internal welds, reductions or flow splitters offers optimal hygiene, safety and CIP cleanability for food & beverage and pharmaceutical applications.
The ease of installation through a Plug & Play interface ensures optimum performance and operation. Combined with the robust stainless steel encapsulation the SITRANS FC300 sets new standards in system integration, and fits any process industry environment and application.
In order to make a complete flowmeter, the SITRANS FC300 flow sensor must be combined with one of the following MASS transmitters:
SITRANS F C MASS 6000: For general industry applications
SIFLOW FC070: For direct integration into SIMATIC based systems
Typical applications: Dosing within chemical industry (dosing of chemicals), Food & beverage industry (concentrates, ketchup, pastes) and Pharmaceutical industry (preparations, dialysis liquids)

Detail

Measuring range	From 0 to 350 kg/h (0 to 772 lb/h)
Nominal size	DN 4 / 1/6"
Accuracy	≤ 0.1 % of rate
Nominal pressure	Max 410 bar (Max 5945 psi)
Medium temperature	From -50 to 180 °C (-58 to 356 °F)
Sensor design	One tube bended
Enclosure	EEx (ia) IIC T3-T6 ATEX and UL/CSA
Approvals	EEx (ia) IIC T3-T6 ATEX and UL/CSA

Benefits

Compact in-line sensor design only 135x205x58 mm (5.12"x7.87"x23.6") makes it easy to install everywhere
Rugged and space saving sensor design in stainless steel matching all applications
Balanced pipe design with little mechanical energy-loss, ensures optimal performance and stability even under non ideal and unstable process conditions
4-wire Pt1000 temperature measurement ensures optimum accuracy on mass flow, density and % fraction
Multiplug electrical connector and SENSORPROM enables true Plug & Play facilitating cost efficient installation and commissioning
Enhanced safety due to standard intrinsically safe EEx ia design

SITRANS F C MASS 2100 DI 1.5

Description

The SITRANS F C MASS 2100 DI 1.5 has demonstrated superior performance in numerous applications and field trials relating to mass flow- and density accuracy and turn down ratio.
The single continuous tube design without internal welds, reductions or flow splitters, offers optimal hygiene, safety and CIP cleanability for food & beverage and pharmaceutical applications.

The SITRANS F C MASS 2100 DI 1.5 is today the preferred meter for research and development and mini-plant applications for liquid or gas measurement, where measuring very small quantities (e.g. drops per hour) is important.

In order to make a complete flowmeter, the SITRANS F C MASS 2100 flow sensor must be combined with one of the following MASS transmitters:
SITRANS F C MASS 6000 (only remote installation): For general industry applications
SIFLOW FC070: For direct integration into SIMATIC based systems

Typical applications: Dosing with chemical industry (dosing of chemicals), Food & beverage industry (concentrates, ketchup, pastes) and Pharmaceutical industry (preparation, dialysis liquids).

Detail

Measuring range	From 0 to 30 kg/h (0 to 66 lb/h)
Nominal size	DI 1.5 (1/16")
Accuracy	≤ 0.1 % of rate
Nominal pressure	Liquid pressure max 365 bar / max 5294 psi (Hastelloy) Liquid pressure max 230 bar / max 3330 psi (Stainless steel)
Medium temperature	From -50 to 180 °C (-58 to 356 °F)
Sensor design	One tube bended
Enclosure	IP65 (NEMA 4)
Approvals	EEx (ia) IIC T3-T6

Benefits

Dual-drive pick-up and driver construction facilitate ultra low-weight pipe construction giving the markets smallest and most stable zero point
Markets biggest wall thickness, ensure optimal lifetime, corrosion resistent and high pressure durability
Multiplug electrical connector and SENSORPROM enables true Plug & Play facilitating cost efficient installation and commisioning
Enhanced safety due to standard intrinsically safe EEx ia design
4-wire Pt1000 temperature measurement ensures optimum accuracy on mass flow, density and % fraction

SITRANS FCS200

Description

The ultra-compact SITRANS FCS200 sensor fits in where space is crucial, providing extra flexibility in any compressed natural gas (CNG) application for both new installations and replacements. With unparalleled accuracy and capacity under high pressure and hazardous conditions, the SITRANS FCS200 sensor sets a new standard for efficiency and safety in CNG.
It is available in three sizes and is easy to install, with a wide range of different connections available.
In order to make a complete flowmeter, the SITRANS FCS200 sensor must be combined with the following MASS transmitter:
SIFLOW FC070: For direct integration into SIMATIC based systems, or used as stand alone with non SIMATIC systems.
Typical applications: Distribution, Compression, Storage and Fueling within CNG industry.

Detail

Measuring range - kg/h (lbs/min)	From 250 (9,2) to 30.000 (1.102,3)
Nominal size	From DN 10 to 25
Accuracy	0.5%
Nominal pressure	Max 350 bar ( 5076 psi)
Ambient temperature	From -40 to 60 °C (-40 to 140° F)
Medium temperature	From -40 to 125 °C (-40 to 257 °F)
Sensor design	Two tubes bended
Enclosure	IP66 / IP67 (EN60529)
Approvals	ATEX: II 1/2 G Ex ia IIC T5-T4 Ga/Gb IECEx: Ex ia IIC T5-T4 Ga/Gb
-Ex Approvals	FM: Class I, Division 1, Groups A, B, C and D NEPSI: Ex ia ll C T4/T5 Ga
-Custody Transfer approvals	PTB Germany OIML R 139

Benefits

Easy adaptable as sensor is available with a wide range of standard gas process connectors to meet virtually any market requirement
Fast fueling due to high capacity
Flexible sensor program as it is available in three sizes ensuring a broad application fit within dispensers, compressors and distribution
Enhanced safety due to standard built-in rupture discs, which reduce personal hazard in the event of pipe fracture
SENSORPROM enables true Plug & Play facilitating cost efficient installation and commissioning

SITRANS F C MC2 DN 50-150 / DN 20-80 (Hygenic)