SITRANS FUG1010 Gas Check Metering Kit

Description

The transportable dual path SITRANS FUG1010 check metering kit is an invaluable tool in lost and unaccounted for (LAUF) analysis and flow survey verifications of gas.
Thanks to its ultrasonic transit time flow measurement technique, the sensors can be mounted on steel, aluminum, titanium and plastic pipes, making it a very versatile instrument for use in any processing plant. With the inclusion of four FMA and CSA approved sensor pairs along with the required mounting equipment, the kit can be used to measure a wide range of pipes.
The check kit comes in a sturdy rolling case with a telescope handle that holds all the equipment needed to conduct performance and verification tests including cables, four pairs of high precision sensors, one IP67 (NEMA 4X) transmitter, a certificate of "Intrinsic Calibration", and more. As with all of the check metering kits, the range can easily by extended by purchasing additional mounting straps/chains.
Application examples include check metering, allocation, flow survey verification and lost and unaccounted for (LAUF) gas analysis.
Pair the SITRANS FUG1010 Gas Check Metering Kit with the SITRANS F US Thickness Gauge to ensure precise flow measurement.

Detail

Measuring range	±30 m/s (±100 ft/s) bidirectional
Pipe range	DN 50 to 1200 (2 to 48") up to 15.7mm (0.62") pipe wall thickness
Accuracy	±0.5-1.0% at ≥0.3 m/s (1ft/s)
Repeatability	±0.15% at ≥0.3 m/s (1ft/s)
Inputs	2 analog, 2 temperature
Outputs	4 analog, 2 frequency
Communication	RS232
Ambient temperature	-18 to 60 °C (0 to 140 °F)
Medium temperature	-40 to 60 °C (-40 to 140 °F)
Typical minimum pressure	10 bar (145 psi)
Enclosure rating	IP65 (NEMA 4X)
Approvals	FM, CSA, ATEX

Benefits

Permits performance check and verification of any type or brand of flow meter
Rolling case and battery power facilitates use in the field
Wide beam ultrasonic technology ensures accurate and reliable flow measurement
Measures a wide range of gas applications

SITRANS FUE1010 Energy Check Metering Kit

Description

The portable SITRANS FUE1010 Energy Check Metering Kit for the HVAC industry is the perfect tool for district energy cooling and chilled water applications as well as power plants where it is an easy-to-use source for checking the performance and accuracy of existing energy meters.
The kit is also well-suited for conducting HVAC application surveys not being metered and air conditioning system balancing. The meter can be set to calculate the kW usage for various functions, including cooling load (kW/ton), coefficient of performance (COP) and energy efficiency ratio (EER).
The SITRANS FUE1010 kit comes in a sturdy rolling case with a telescope handle that holds all the equipment needed to conduct performance and verification tests including cables, four pairs of high precision transducers, two pairs of resistance temperature detectors (RTD’s), one impact resistant IP 40 (NEMA 1) transmitter, a certificate of "Intrinsic Calibration", and more. As with all of the check metering kits, the range can easily by extended by purchasing additional mounting straps/chains.
Application examples include chilled and hot water sub-metering, condenser water, potable water, ammonia and glycol, river and lake water and lake source cooling.
Pair the SITRANS FUE1010 Energy Check Metering Kit with the SITRANS F US Thickness Gauge to ensure precise flow measurement.

Detail

Measuring range	±12 m/s (±40 ft/s) bidirectional
Pipe range	DN 50 to 1050 (2 to 42") up to 11.2mm (0.44") pipe wall thickness
Accuracy	±0.5 to 1.0% at ≥0.3 m/s (1ft/s)
Repeatability	±0.15% at ≥0.3 m/s (1ft/s)
Inputs	4 analog, 2 temperature
Outputs	4 analog, 4 status, 2 frequency
Communication	RS232
Ambient temperature	-18 to 60 °C (0 to 140 °F)
Medium temperature	-40 to 230 °C (-40 to 450 °F)
Enclosure rating	IP40 (NEMA 1)
Approvals	UL, ULc, CE

Benefits

Permits performance check and verification of any type or brand of flow meter
Minimizes capital cost by enabling simultaneous measurement of two pipes (dual channel)
Rolling case and battery power facilitates use in the field
Ensures high accuracy measurement with the precision-matched 1000 Ohm platinum RTD’s

SITRANS FUP1010 Liquid Check Metering Kit

Description

With the SITRANS FUP1010 Liquid Check Metering kit all types of liquids can be measured. It is the most versatile check metering in the portfolio with applications ranging from slurries in the mining industry to crude and light hydrocarbons in the oil industry.
This single channel kit comes with four sets of transit time and one pair of Doppler sensors. This setup ensures that it can be used to measure a very wide range of pipe sizes up to DN 1200 (48").
The SITRANS FUP1010 check kit comes in a sturdy rolling case with a telescope handle that holds all the equipment needed to conduct performance and verification tests including cables, four sets of transit time and one set of Doppler sensors, one IP67 weatherproof transmitter, a certificate of "Intrinsic Calibration", and more. As with all of the check metering kits, the range can easily by extended by purchasing additional mounting straps/chains.
Application examples include light and crude hydrocarbons, chemicals, mining and mixed liquor.
Pair the SITRANS FUP1010 Liquid Check Metering Kit with the SITRANS F US Thickness Gauge to ensure precise flow measurement.

Detail

Measuring range	±12 m/s (±40 ft/s) bidirectional
Pipe range	DN 20 to 1200 (0.75 to 48")
Accuracy	±0.5 to 2.0% at ≥0.3 m/s (1ft/s)
Repeatability	±0.15% at ≥0.3 m/s (1ft/s)
Inputs	4 analog, 2 temperature
Outputs	4 analog, 4 status, 2 frequency
Communication	RS232
Ambient temperature	-18 to 60 °C (0 to 140 °F)
Medium temperature	-40 to 104 °C (-40 to 220 °F)
Enclosure rating	IP67
Approvals	UL, ULc, CE

Benefits

Permits performance check and verification of any type or brand of flow meter
Measures a wide variety of liquid applications
Sensors of varying sizes accommodate different pipe size requirements
Rolling case and battery power facilitates use in the field

SITRANS FUP1010 Water Check Metering Kit

Description

Thanks to the inclusion of three different transducer pairs, the single channel SITRANS FUP1010 check metering kit for water and wastewater applications measures a wide range of liquids. This is made possible by the meter’s dual mode of operation which enables use of transit time as well as Doppler flow measurement.
Transit time operation is the preferred mode for relatively homogeneous liquids whereas Doppler is the ideal measurement method for heavily aerated liquids or liquids with suspended solids.
The check kit comes in a sturdy rolling case with a telescope handle that holds all the equipment needed to conduct performance and verification tests including cables, two pairs of transit time and one pair of Doppler transducers, one IP67 weatherproof transmitter, a certificate of "Intrinsic Calibration", and more. As with all of the check metering kits, the range can easily by extended by purchasing additional mounting straps/chains.
Application examples include raw and portable water, raw sewage, effluent, fresh water, and temporary leak detection in large intake or distribution pipes.
Pair the SITRANS FUP1010 Water Check Metering Kit with the SITRANS F US Thickness Gauge to ensure precise flow measurement.

Detail

Measuring range	±12 m/s (±40 ft/s) bidirectional
Pipe range	DN 50 to DN 1050 (2" to 42")
Accuracy	±0.5 to 2.0% at ≥0.3 m/s (1ft/s)
Repeatability	±0.15% at ≥0.3 m/s (1ft/s)
Inputs	4 analog, 2 temperature
Outputs	4 analog, 4 status, 2 frequency
Communication	RS232
Ambient temperature	-18 to 60 °C (0 to 140 °F)
Medium temperature	-40 to 104 °C (-40 to 220 °F)
Enclosure rating	IP67
Approvals	UL, ULc, CE

Benefits

Permits performance check and verification of any type or brand of flow meter
Accommodates shifting measurement conditions necessitated by presence of high aeration or suspended solids (dual mode)
Ensures higher accuracy by allowing two sets of transducers to be set up on one pipe and averaged (dual path)
Measures a wide variety of water applications